Panasonic DMCFX100K User Manual

Page of 128
Preparation
13
VQT1F52
Inserting and 
Removing the Card 
(optional)/the Battery
• Check that this unit is turned off.
• Prepare a card. (optional)
• You can record or play back pictures 
on the built-in memory when you are 
not using a card.
1 Slide the release lever in the 
direction of the arrow and open 
the card/battery door.
• Always use genuine Panasonic 
batteries (CGA-S005A).
• If you use other batteries, we cannot 
guarantee the quality of this product.
2 Battery:
Insert it fully being careful about 
the direction you insert it.
Pull the lever 
A in the direction of 
the arrow to remove the battery.
Card:
Push it fully until it clicks being 
careful about the direction you 
insert it. 
To remove the card, push the card 
until it clicks, then pull the card 
out upright. 
B: Do not touch the connection terminals 
of the card.
• The card may be damaged if it is not 
fully inserted.
1:
Close the card/battery door.
2:
Slide the release lever in the 
direction of the arrow.
• If the card/battery door cannot be 
completely closed, remove the card, 
check its direction and then insert it 
again.
• Remove the battery after use. Store the 
removed battery in the battery carrying 
case (supplied).
• Do not remove the battery until the 
LCD monitor and the status indicator 
(green) turn off as the settings on the 
camera may not be stored properly.
• The supplied battery is designed only 
for the camera. Do not use it with any 
other equipment.
• Do not insert or remove the battery or 
the card while this unit is turned on. 
The data on the built-in memory or the 
card may be damaged. Be particularly 
careful while the built-in memory or the 
card is being accessed.
 (P22)
• We recommend using a Panasonic 
card.
B
A
DMC-FX100ENG.book  13 ページ  2007年5月16日 水曜日 午後3時22分