Panasonic DMC-LZ2GN User Manual

Page of 104
Playback (advanced)
83
VQT0P83
Playing Back Pictures on a TV Screen
∫ Playing back pictures with the 
supplied cable
The procedure for DMC-LZ2 is described 
below. In the case of DMC-LZ1, connect 
the TV and the [V.OUT] terminal on the 
camera with the video cable (supplied).
• Turn the camera and the TV off.
1 Connect the AV cable 
(supplied) to the [AV OUT] socket 
of the camera.
• Connect the AV cable with the [
mark facing the [
1] mark on the 
[AV OUT] socket.
• Hold the plug 
B to push into or pull out.
2 Connect the AV cable to the video 
input and the audio input sockets 
of the TV.
1 Yellow: to the video input socket
2 White: to the audio input socket
3 Turn the TV on and select external 
input.
4 Turn the camera on and then set 
the mode dial to playback mode 
[
].
∫ Viewing pictures in other countries
When setting [VIDEO OUT] on the 
[SETUP] menu, you can view images on 
the TV in other countries (regions) which 
use the NTSC or PAL system.
∫ Playback pictures on TV with SD 
Memory Card slot
A recorded SD Memory Card can be 
played back on TVs with an SD Memory 
Card slot.
If you play back pictures recorded using 
[HDTV] mode on a High-Definition TV, 
(HDTV has 16:9 aspect) the picture quality 
will be better.
(MultiMediaCard may not be played back 
on TV with SD Memory Card slot.)
• Do not use any other AV cables 
(DMC-LZ2)/video cables (DMC-LZ1) 
except the supplied one.
• Only when the mode dial is set to 
playback mode [
], the picture is 
displayed on the TV.
• Read the TV operating instructions too.
• Audio playback is in monaural.
(DMC-LZ2 only)
DIGITAL
AV OUT
DC IN
3V
VQT0P83ENG.book  83 ページ  2005年3月1日 火曜日 午前11時28分