Panasonic DMCFS3S User Manual

Page of 120
VQT1M97
12
Preparation
Preparation
Charging the Battery
Use the dedicated charger and battery.
The battery is not charged when the camera is shipped. Charge the battery before use.
Charge the battery with the charger indoors.
Charge the battery in a temperature between 10
oC to 35 oC (50 oF to 95 oF). (The battery 
temperature should also be the same.)
∫ When the [CHARGE] indicator flashes
The battery temperature is excessively high or low. The charging time will be longer than 
normal. Also, charging may not be completed.
The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
Note
After charging is completed, be sure to disconnect the power supply device from the electrical 
outlet.
The battery becomes warm after using it and during and after charging. The camera also 
becomes warm during use. This is not a malfunction.
The battery will be exhausted if left for a long period of time after being charged.
The battery can be recharged even when it still has some charge left, but it is not 
recommended that the battery charge be frequently topped up while the battery is fully 
charged. (The battery has characteristics that will reduce its operating duration and cause the 
battery to swell up.)
Attach the battery with 
attention to the direction of the 
battery.
Connect the charger to the 
electrical outlet.
Charging starts when the [CHARGE] 
indicator 
A lights green.
Charging is complete when the 
[CHARGE] indicator 
A turns off (after 
approx. 120 min maximum).
Detach the battery after 
charging is completed.
1
2
90°
3
DMC-FS5&FS3_VQT1M97.book  12 ページ  2007年12月26日 水曜日 午後11時59分