Panasonic DMC-SZ02/B User Manual
Connecting to other equipment
- 102 -
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Connect the computer and camera with the USB connection cable
(supplied).
(supplied).
Press 3/4 to select [PC], and then press [MENU/SET].
Operate the PC.
•
You can save the images into the PC by dragging and dropping the image, or the folder
with the image that you would like to transfer onto a different folder in the PC.
Note
•
Use a battery with sufficient battery power. If the remaining battery power becomes low while
the camera and the PC are communicating, the alarm beeps.
before disconnecting the
USB connection cable. Otherwise, data may be destroyed.
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
Loading still pictures or motion pictures
•
Check the directions of the connectors, and plug them straight in or unplug them
straight out. (Otherwise the connectors may bend out of shape, which may cause
malfunction.)
•
Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
A USB connection cable (supplied)
B Align the marks, and insert.
B Align the marks, and insert.