Panasonic DMCFS3A User Manual

VQT1M97

Connecting to other equipment

You can acquire recorded pictures to a PC by connecting the camera and the PC.
•

You can easily print out or mail the pictures you have imported. Use of the 

PHOTOfunSTUDIO-viewer-

 bundled software on the CD-ROM (supplied) is a convenient 

way of doing this.

Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.

A (supplied).

A USB connection cable (supplied)

Check the directions of the connectors, and plug them straight in or unplug them straight out. 
(Otherwise the connectors may be bent out of shape which will cause trouble.)

B Align the marks, and insert.
C AC adaptor (DMW-AC5PP; optional)

Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional). If the 
remaining battery power becomes low while the camera and the PC are communicating, the 
status indicator blinks and the alarm beeps.
Refer to 

Disconnecting the USB connection cable safely

 (P84) before disconnecting the USB 

connection cable. Otherwise, data may be destroyed.

3/4 to select [PC], and then press [MENU/

If [USB MODE] (P24) is set to [PC] in the [SETUP] menu in 
advance, the camera will be automatically connected to the PC 
without displaying the [USB MODE] selection screen. Since there 
is no need to set this each time you connect to the PC, it is 
convenient.

When the camera has been connected to the PC with 
[USB MODE] set to [PictBridge(PTP)], a message may appear 
on the PC’s screen. Select [Cancel] to close the screen, and 
disconnect the camera from the PC. Then set [USB MODE] to 
[PC] again.

A

C

B

USB MODE

SELECT

SET

PLEASE SELECT 
THE USB MODE

PictBridge(PTP)

PC

DMC-FS5&FS3_VQT1M97.book  83 ページ  ２００７年１２月２６日　水曜日　午後１１時５９分