Panasonic DMC-LS75 User Guide

VQT1C63

The camera detects movements of the 
subject near the center of the frame and 
sets the optimum ISO sensitivity and 
shutter speed according to the movements 
and brightness.

1 Press [MENU/SET].
2 Press e/r to select [ISO LIMIT] 

and then press q.

3 Press e/r to select the menu 

400

The camera raises the ISO 
sensitivity up to the level you have 
set to match the movement and 
brightness of the subject.

800

1250

• The higher you raise the ISO sensitivity, 

the less chance there is of the subject 
blurring, but picture noise will increase.

• When shooting a moving subject indoors, 

you can reduce blur by raising ISO 
sensitivity and increasing the shutter 
speed. 

• When taking pictures of a motionless 

subject, you can reduce noise by setting 
ISO sensitivity at a low level.

• When you press the shutter button 

halfway, [

] appears. When you press 

the shutter button fully, the shutter speed 
and the ISO sensitivity appear for a while.

• Focus range is 5 cm (0.16 feet) (Wide)/30 

cm (0.98 feet) (Tele) to 

Z.

• ISO sensitivity can be raised to a maximum 

of [ISO640] when using the fl ash (when 
ISO Limit is set to anything other than 
[ISO400]).

• Refer to P42 for the available fl ash range.
• Brightness or the subject’s moving speed 

may cause pictures to blur.

• Movement detection may not be possible 

in the following cases.
– When the moving subject is too small
– When the moving subject is on the 

edge of the frame

– In case the subject began to move the 

moment you pressed the shutter button 
fully 

• To avoid picture noises, we recommend 

reducing the [ISO LIMIT] or setting [COL. 
MODE] to [NATURAL] (P66).

• You cannot use the digital zoom.

ISO

F2.8

ISO

F2.8

ISO

F2.8

ISO

AWB

1/3

4:3

400

800

1250

ISO

MAX

REC

SELECT SET

W.BALANCE
ISO LIMIT
ASPECT RATIO
PICT.SIZE
QUALITY