Panasonic DMCFX9K User Manual

Page of 124
Recording pictures (basic)
45
VQT0S57
Taking Pictures using Burst Mode
1 Press the single or burst mode 
button to switch the burst mode 
setting and then take pictures.
: High speed
;
: Low speed
;
: Unlimited
¢
1
;
No display: canceled
¢1 Depending on the memory size, 
battery power, picture size and 
quality (compression)
• Hold down the shutter button fully to 
activate the burst mode.
∫ Number of pictures recorded in burst 
mode
¢2 The burst speed is constant regardless 
of the transfer speed of the card.
• When the shutter speed is faster than 
1/60 and the flash is not activated.
• When the burst mode setting is set to 
Unlimited
– You can take pictures until the capacity 
of the card becomes full.
– The burst speed becomes slower 
halfway. Depending on the picture size 
or card, the speed differs.
• The focus is fixed at taking the first 
picture.
• In simple mode [
], the burst speed is 
fixed to Low.
• When the self-timer is used, the number 
of recordable pictures in burst mode is 
fixed to 3.
• When the burst mode is activated, [AUDIO 
REC.] cannot be used.
• When the flash is activated or [STARRY 
SKY] (P63) in scene mode is selected, 
you can take only 1 picture.
• When setting auto bracket and the burst 
mode simultaneously, auto bracket will be 
performed.
3
Burst speed 
(pictures/
second)
Number of recordable 
pictures (pictures)
3
¢
2
max. 6
max. 8
2
¢
2
max. 6
max. 8
approx. 1.5
Depends on remaining 
capacity of the card