Panasonic DMCFX100S User Manual

Advanced (Recording pictures)

44

VQT1F52

The camera detects the movement of the 
subject near the center of the screen and 
then sets the optimal ISO sensitivity and 
shutter speed according to the movement 
and the brightness of the subject. 

3/4 to select [ISO LIMIT] 

1.

3/4 to select the item and 

• The higher the value set for the ISO 

sensitivity, the more effectively the jitter 
will be reduced. However, picture noise 
will increase.

• Jitter is avoided when taking pictures 

indoors of a moving subject by increasing 

the ISO sensitivity and making the shutter 
speed faster. 

• Noise is avoided when taking pictures 

indoors of a subject with no movement by 
decreasing the ISO sensitivity.

• When you press the shutter button 

halfway, [

] 

A appears. When you 

press the shutter button fully, the shutter 
speed and the ISO sensitivity appear for a 
while.

• The focus range becomes the same as 

macro mode. [5 cm (0.16 feet) (Wide)/
30 cm (0.98 feet) (Tele) to 

¶]

• When the flash is activated, the ISO 

sensitivity is automatically increased to a 
maximum of [ISO640]. (When the highest 
ISO sensitivity is set to a setting other 
than [ISO400].)

• Refer to P39 for information about the 

available flash range.

• Depending on the brightness and how fast 

the subject is moving, jitter may not be 
avoided.

• The camera may not be able to detect the 

movement of the subject in the following 
cases.

The ISO sensitivity 
automatically increases up to 
the set value according to the 
movement and brightness of 
the subject.

1/125 ISO800

1/125 ISO200

A

DMC-FX100ENG.book  44 ページ  ２００７年５月１６日　水曜日　午後３時２２分