Panasonic DMCFX100S User Manual

Connecting to other equipment

92

VQT1F52

Connecting to other equipment

You can acquire recorded pictures to a PC 
by connecting the camera and the PC.
The software [LUMIX Simple Viewer] or 
[PHOTOfunSTUDIO-viewer-] 
(for Windows

®

) in the CD-ROM (supplied) 

allows you to easily acquire pictures 
recorded with the camera to a PC, print 
them and send them by e-mail.
If you use “Windows

 

the USB driver and then connect it to 
the computer.
Read the separate operating instructions 
for the supplied software for more  
information about the software in the 
CD-ROM (supplied) and how to install it.

A USB connection cable (supplied)
B AC adaptor (DMW-AC5PP; optional)

• Use a battery with sufficient battery power 

or the AC adaptor (DMW-AC5PP; 
optional).

• Turn the camera off before inserting or 

removing the cable for the AC adaptor 
(DMW-AC5PP; optional).

• Set the camera to a mode other than 

[

] mode.

A 

• Connect the USB connection cable with 

the [

] mark facing the [

2] mark on 

the [DIGITAL] socket.

• Hold the USB connection cable at 

1 

and insert straight in or take straight 
out. (If you forcibly insert the USB 
connection cable at a slant or upside 
down you can deform the connection 
terminals and damage the camera or 
the connected equipment.)

C This message appears during data 

transfer.

[Windows]
The drive appears in the [My Computer] 
folder.
• If you are connecting the camera to a PC 

for the first time, the required driver is 
installed automatically so that the camera 
can be recognized by “Windows Plug and 
Play”. The drive then appears on the 
[My Computer] folder.

[Macintosh]
The drive is displayed on the screen.
• The drive is displayed as [LUMIX] when 

you connect the camera with no card 
inserted.

ACCESS

DMC-FX100ENG.book  92 ページ  ２００７年５月１６日　水曜日　午後３時２２分