Panasonic DMCFX7 User Manual
Others
98
Troubleshooting
If you put the menu back to the settings at the time of purchase, the conditions may be
improved. Carry out the [RESET] in the setup menu. (P23)
improved. Carry out the [RESET] in the setup menu. (P23)
Conditions
Causes
The camera will not turn
on.
on.
Is the battery inserted correctly? Check the direction of the
battery.
battery.
Is the battery sufficiently charged?
Use a battery that has been sufficiently charged.
Use a battery that has been sufficiently charged.
The picture is not
displayed on the LCD
monitor.
displayed on the LCD
monitor.
Is the power save mode (P21) or economy mode (P22)
activated? Press the shutter button halfway to disactive these
modes.
activated? Press the shutter button halfway to disactive these
modes.
Is the battery charge insufficient to operate the camera? Use
a battery that has been sufficiently charged.
a battery that has been sufficiently charged.
Is the built-in flash charging? While the flash is being
charged in economy mode, the LCD monitor is off.
charged in economy mode, the LCD monitor is off.
The brightness of the
screen becomes dark or
bright for a moment.
screen becomes dark or
bright for a moment.
This phenomenon appears when pressing the shutter button
halfway to set the aperture value and does not affect the
recorded pictures.
halfway to set the aperture value and does not affect the
recorded pictures.
The picture cannot be
recorded.
recorded.
Is the card inserted?
Is the mode dial correctly set?
Is there any memory capacity left on the card?
Before recording, delete some pictures.
Before recording, delete some pictures.
The screen is too bright
or dark.
or dark.
Adjust the brightness of the screen. (P21)
Is the Power LCD function activated? (P25)
Flash is not activated
Is the flash mode set to Forced OFF? Change the flash
mode. (P37)
mode. (P37)
The flash is not activated when [SCENERY],
[NIGHT SCENERY], or [FIREWORKS] in scene mode is
selected.
[NIGHT SCENERY], or [FIREWORKS] in scene mode is
selected.
The flash is activated
2 times.
2 times.
The first flash is activated for red-eye prevention on the
subject (red-eye phenomenon). 1 second after, the flash is
activated again for recording.
subject (red-eye phenomenon). 1 second after, the flash is
activated again for recording.
Unreadable language
was selected by mistake.
was selected by mistake.
Select [
] icon on the [SETUP] menu to set the desired
language.
The subject is not
focused properly.
focused properly.
The focus range varies depending on the recording mode.
Rotate the mode dial to set to the proper mode for the
distance to the subject.
Rotate the mode dial to set to the proper mode for the
distance to the subject.
Is the subject out of the focus range? (P30)
When you cannot focus on the subject even if you tried many
times, turn the camera off once and turn it on again.
times, turn the camera off once and turn it on again.
FX7PP.book 98 ページ ２００４年７月３０日 金曜日 午前１０時３７分