Panasonic DMCFZ28K User Manual

VQT1S36

Depending on the recording conditions, the recording interval may become more than 
2 seconds when [10S/3PICTURES] is selected.

The flash output may not be constant when [10S/3PICTURES] is selected.

[10S/3PICTURES] cannot be set when auto bracket or color bracket is set, or when the scene 
mode [FLASH BURST] is set.

Self-timer cannot be set to 2 seconds or [10S/3PICTURES] in Intelligent auto mode.

Self-timer cannot be used while in [HI-SPEED BURST] in scene mode.

You cannot use the following functions when [10S/3PICTURES] is selected.

Burst mode

[AUDIO REC.]

[REC] mode: 

Use this function when you cannot achieve appropriate exposure due to the difference in 
brightness between the subject and the background. Look at the following examples.

∫ Operate with the joystick

2 to select [È], and then move 

3/4 to compensate the exposure.

A Exposure compensation value

Select [È] only to return to the original exposure (0 EV).

Press the shutter button halfway to finish.

EV is an abbreviation of [Exposure Value]. It refers to the amount of light 
given to the CCD by the aperture value and the shutter speed.

The exposure compensation value appears on the lower left of the screen.

The set exposure value is memorized even if the camera is turned off.

The compensation range of the exposure will be limited depending on the brightness of the 
subject.

Compensate the exposure 
towards positive.

Compensate the exposure 
towards negative.

3 [È] until [EXPOSURE] appears, 

 2/1.

Select [0 EV] to return to the original exposure.

You can also press the shutter button halfway to finish.

DMC-FZ28P_PC.book  53 ページ  ２００８年７月２日　水曜日　午後１１時１４分