Panasonic DMCFZ40K User Manual

Page of 223
Connecting to other equipment
- 184 -
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s LCD monitor.
Some printers can print directly from the card removed from the camera. For details, refer to 
the operating instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
Connect the camera to a printer via the USB connection cable 
A 
(supplied).
When the camera is connected to the printer, the cable disconnect prohibit icon [å] 
appears. Do not disconnect the USB cable while [å] is displayed.
Press 
3/4 to select [PictBridge(PTP)], and then 
press [MENU/SET].
A USB connection cable (supplied)
Check the direction and shape of the terminal and plug in/out while holding the plug straight. 
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler 
(optional). If the remaining battery power becomes low while the camera and the printer are 
connected, the alarm beeps. If this happens during printing, stop printing at once. If not printing, 
disconnect the USB connection cable.
AV OUT/DIGITAL
AV OUT/DIGITAL
USB MODE
SELECT
SET
PLEASE SELECT 
THE USB MODE
PictBridge(PTP)
PC