Panasonic DMC-TZ10 User Manual

Page of 178
22   
VQT2R48
VQT2R48
   23
   Using the [SETUP] menu
For details about the setting procedure in the [SETUP] menu (→20)
 
[CLOCK SET]
Set the date and time. 
(→17, 19)
Set time, date, and display format.
[BEEP]
Change or mute the 
beep/shutter sounds.
[BEEP LEVEL]
/
/
 : Mute/Low/High
[BEEP TONE]
 
/
/
 : Change beep tone.
[SHUTTER VOL.]
/
/
 : Mute/Low/High
[SHUTTER TONE]
/ /  : Change shutter tone.
 
[VOLUME]
Adjust volume of sound 
from speakers (7 levels).
0 • • [LEVEL3] • • [LEVEL6]
 
• Cannot be used to adjust TV speaker volume when 
connected to TV. (We recommend setting camera 
volume to 0)
 
[CUST.SET MEM.]
Register settings on 
current camera. (→59) 
[C1] / [C2] / [C3]
Item
Settings, notes
For details about the setting procedure in the [SETUP] menu (→20)
Make general camera settings such as adjusting the Clock, extending the battery life, and 
changing the Beep sounds.
[CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important for Clock setting 
and battery life. Please check these before use.
 
[LCD MODE]
Make LCD monitor easier 
to see.
[OFF]: Normal (cancel setting)
 [AUTO POWER LCD]:
The brightness is adjusted automatically depending on 
how bright it is around the camera.
 [POWER  LCD]:
Makes screen brighter than normal (for outdoor use).
 
• [AUTO POWER LCD] does not work in the following cases: 
During playback, during menu display, when connected to 
computer/printer.
 
• [POWER LCD] returns to ordinary brightness if there is no 
operation for 30 seconds when recording. (Press any button to 
make brighter again).
 
• Because the picture shown on the LCD monitor screen 
emphasizes brightness, some subjects may look different than 
their actual appearance, but this will not affect the recorded 
picture. 
 
• Block out sunlight (with hand, etc.) if reflection makes screen 
difficult to see.
 
• Setting [LCD MODE] will reduce the number of pictures that can 
be recorded and recording time. 
 
• When [LCD POWER SAVE] is set, the brightness of the LCD 
monitor follows the setting in [LCD MODE], but the picture quality 
of the LCD monitor stays at a low level.
[DISPLAY SIZE]
Change the display size 
of the menu.
[STANDARD]/[LARGE]
 
[GUIDE LINE]
Select recording 
information display and 
types of guidelines. (→46)
[REC. INFO.]
[OFF]/[ON]  
(Display recording information with guide 
lines.)
[PATTERN]
 /   : Change the patterns of guide lines.
 
[HISTOGRAM]
Check subject brightness 
on graph. (→46)
[OFF]/[ON]
Item
Settings, notes
downloadlike
ArtboardArtboardArtboard
Report Bug