Panasonic DMC-TZ10 User Manual

Page of 178
70   
VQT2R48
VQT2R48
   71
Taking pictures according to the scene 
[SCENE MODE] 
(Continued)
Recording Mode: 
 
 Registering commonly used scenes 
[MY SCN MODE]/[MY SCENE MODE]
Recording Mode: 
 
 and 
 
Both represent the same function. Frequently-used scenes can be preset to each 
position so that you can quickly and easily switch to the desired Scene Mode.
 
For details on the preset scenes, see the pages on Scene Modes.
 
If recording settings are reset by [RESET] in the [SETUP] menu, the preset Scene 
Modes are cleared.
Set to 
Set to 
/
 (  for 
)
DMC-TZ10
DMC-ZS7 
 
DMC-TZ8
DMC-ZS5
If you have already 
registered in My 
Scene Mode, it 
is displayed as a 
registered scene.
Select and set the scene
(Press [MENU/SET], select  , and then 
press ►, if the scene menu is not displayed.)
 
Scene menu
The zoom lever 
can also be used 
to switch to the 
next screen.
To see a description of a scene:
Select the scene, and press [DISPLAY].
 
Taking pictures in 
registered Scene Modes
Set the mode dial to 
 
 (
 
for 
), and take a picture.
•  Functions, tips for each scene 
(→62 - 70)
 
Changing registered Scene 
Modes
Perform the registration operation 
again
 
Taking motion pictures 
(→72)
You can register a commonly used Scene Mode in 
 
 (
 for 
) on the mode 
dial.
After the settings are made, pictures can be taken in the preset Scene Mode by simply 
setting the mode dial to 
 
 (
 for 
).
[PHOTO 
FRAME]
A frame is superimposed over the image.
Press ◄► to select the frame, and then press 
[MENU/SET].
 
• The recording pixel level is 2 M 
(
).
 
• The following function is fixed:
[AUTO REVIEW]: [2 SEC.]
 
• The colour of the frame displayed 
on the screen may differ slightly 
from the colour of the frame on 
the still picture that is recorded.
 
• Guide lines cannot be displayed.
 
• The following functions are not 
available.
Extra Optical Zoom/[DIGITAL 
ZOOM]/[AUTO BRACKET]/
[MULTI ASPECT]/[BURST]
 
 [UNDERWATER]
Achieve natural colours under water.
  Tips  
 
• For fast moving subjects, align with the AF 
area and press ◄ (AF Lock).
(Press ◄ again to release.)
 
• If the zoom is operated after AF Lock is set, 
the AF Lock setting will be cancelled and must 
be set again.
 
• AF Lock cannot be set if [AF MODE] is set 
to 
.
 
• Adjust red and blue levels with ‘White Balance 
fine adjustment’ (→98).
 
• Focus (same as macro recording)
Max. W: 3 cm (0.10 feet) and above 
Max. T:    1 m (3.28 feet) and above
(5 × to 8 × is 2 m to ∞)
 
• Always use marine case 
(optional).
 
• Positioning is not possible 
underwater, because the GPS 
signals cannot reach the camera.
 
• Self-timer: Cannot be used
[AF LOCK]
(focus fixed)
AF area
[MENU/SET]
[DISPLAY]
Zoom lever
Scene
Uses, Tips
Notes
downloadlike
ArtboardArtboardArtboard
Report Bug