Panasonic DMC-TZ10 User Manual

Page of 178
96   
VQT2R48
VQT2R48
   97
For [REC] menu setting procedures (→20)
Using the [REC] menu
 
(Continued)
   [QUALITY]
Set quality of picture.
 
Recording Mode: 
 
 
 
 
 
 
Settings:    Fine (High quality, priority to picture quality)
 Standard (Standard quality, priority to the number of pictures)
   [ASPECT RATIO]
Aspect ratio of still picture can be changed according to printing or playback format.
 
Recording Mode: 
 
 
 
 
 
 
Settings:
3
4
2
3
9
16
Same as 4:3 TV or computer
Same as normal film camera
For playback on widescreen/
high definition TV
 
Edges may be cut off when printing – be sure to check in advance.
 
In 
 ([INTELLIGENT AUTO] Mode), 
 (11.5M) and 
 (10.5M) may be selected 
by changing the [PICTURE SIZE].
 
 [INTELLIGENT ISO]
Camera automatically adjusts ISO Sensitivity and shutter speed according to movement 
of subject to avoid blur. Higher ISO Sensitivity reduces subject blur and jitter but can 
increase interference. Please select maximum ISO Sensitivity according to table below.
 
Recording Mode: 
 
 
Settings: [OFF] / 
 / 
 / 
Setting guide
Movement of subject
Slow
Fast
ISO Sensitivity
Low
High
Shutter speed
Slow
Fast
Interference
Low
High
 
Slow-moving subject
 
Fast-moving subject
ISO Sensitivity 200
(Shutter speed 1/30)
ISO Sensitivity 800
(Shutter speed 1/125)
 
Shutter speed and ISO Sensitivity are displayed in the screen for a few seconds after 
recording.
 
If interference becomes noticeable, we recommend reducing the setting, or setting 
[NOISE REDUCTION] in [PICT.ADJ.] in the + direction.
 
Blurring may occur depending on brightness, size, position, and speed of movement of 
the subject (e.g. if subject is too small, is on edge of picture, or starts moving as soon 
as shutter button is pressed).
 
Scope of flash recording (→48)
   [SENSITIVITY]
Set ISO Sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
 
Recording Mode: 
 
 
 
 
Settings: [AUTO] / [80] / [100] / [200] / [400] / [800] / [1600]
Setting guide
[SENSITIVITY]
[80]
[1600]
Location
(recommended)
Bright 
(outdoors)
Dark
Shutter speed
Slow
Fast
Interference
Low
High
 
[AUTO] is automatically set in a range up to 400 (1000 when flash is used) based on 
subject movement and brightness.
 
Scope of flash recording (→48)
 
Cannot be set when [INTELLIGENT ISO] is used (
 is displayed)
 
If interference becomes noticeable, we recommend reducing the setting, or setting 
[NOISE REDUCTION] in [PICT.ADJ.] in the + direction.
downloadlike
ArtboardArtboardArtboard
Report Bug