Panasonic DMCZS35K User Manual

∫ [Picture Size]
A picture taken with the camera is saved as picture data of up to approximately 16 million pixels.
The smaller the number of pixels is, the greater the number of recordable pictures will be.

• Quality [A]

∫ [Quality]
Set the compression rate at which the pictures are to be stored.

∫ [Sensitivity]
This allows the Sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure enables 
pictures to be taken even in dark places without the resulting pictures coming out dark.

∫ [Date Stamp]
You can take a picture with date and time of recording.

This unit can record motion pictures in MP4 format.

• Still pictures can be taken during motion picture recording by pressing the shutter button. 

(Simultaneous recording)

¢

¢ Simultaneous recording is not possible in the following cases:

– When [Rec Quality] is set to [VGA]

– [Miniature Effect] (Creative Control Mode)

∫ About the recording quality setting
The recording quality for motion pictures can be changed in [Rec Quality] of the 
[Motion Picture] menu.

• When recording to the built-in memory, [Rec Quality] is fixed to [VGA].

• The maximum continuous recordable time of a motion picture is 29 minutes and 59 seconds, 

which is equivalent to a file size of approximately 4 GB. 
You can check the recordable time on the screen. (With [FHD], the file size becomes larger, 
causing the recordable time to become shorter than 29 minutes and 59 seconds)

∫ About zooming while recording motion pictures

• The Extended Optical Zoom and Intelligent Zoom cannot be used during the motion picture 

recording.

• If the Extended Optical Zoom or Intelligent Zoom are used before pressing the motion picture 

button, these settings will be cleared, so the recording range will change dramatically.

Built-in Memory (Approx. 70 MB)

12

60

420

Card (2 GB)

335

1600

11100

[A]

([Fine])

When giving priority to the picture quality

[›] ([Standard])

When using the standard picture quality and increasing the number 
of pictures to be recorded without changing the number of pixels

Recording location 
(recommended)

When it is light (outdoors)

When it is dark

Shutter speed

Slow

Fast

Noise

Less

Increased

Jitter of the subject

Increased

Less

Stamp the year, month, and day.

Stamp the year, month, day, hour, and minutes.

—

Mode dial
• You can record motion pictures fitting each 

Recording Mode.
(Motion pictures cannot be recorded in 
Panorama Shot Mode.)

Motion picture button
• The recording state indicator (red) will flash 

while recording motion pictures.

• Stop the recording by pressing the motion 

picture button again.

[FHD]

1920k1080

30p

20 Mbps

16:9

[HD]

1280k720

10 Mbps

[VGA]

640k480

4 Mbps

4:3

[(] (Playback) button
• Use this to play back pictures.

Cursor buttons
• 2/1: to select the picture

[

] (Delete/Cancel) button

• [

]: to delete the displayed picture

R1m07

s

R1m07

s

R1m07

s

3s

3s

3s

100-0001

100-0001

100-0001

1/5

1/5

The camera comes with menus that allow you to choose the settings for taking pictures 
and playing them back just as you like and menus that enable you to have more fun 
with the camera and use it more easily.

Press 3/4/2/1 to select menu and then press [MENU/SET].

∫ Close the menu
Press [

• In recording mode, the menu screen can also be exited by pressing the shutter button halfway.
• There are functions that cannot be set or used depending on the modes or menu settings 

being used on the camera due to the specifications.

¢

In this manual, the app is referred to as “Image App”.

The menu lets you set the Coloring, Sensitivity or Number of 
pixels, etc. of pictures you are recording.

This menu lets you set the setting for motion pictures such as 
recording quality.

This menu lets you select the playback method. The options 
include slideshow playback.

This menu lets you make changes to the pictures taken. For 
example, you can set protection for the pictures taken, or crop them.

This menu lets you perform the clock settings, beep tone 
settings and other settings which make it easier for you to 
operate the camera.

This menu lets you make the settings necessary to connect to 
Wi-Fi or use the Wi-Fi function.

Press 3/4 to select the menu item and then press [MENU/SET].

• It will switch to the next page when you reach the bottom.

(It will also switch by rotating the zoom lever)

Press 3/4 to select the setting and then press [MENU/SET].

• Depending on the menu item, its setting may not appear or it may be displayed in a 

different way.

¢

smartphone/tablet.
• OS (As of January 2014)
App for Android

TM

: Android 2.3.3 or higher

> Search the Google Play

TM

 Store for “Panasonic Image App” or “LUMIX”, and install the app.

App for iOS: iOS 5.0 or higher:

> Search the App Store

SM

 for “Panasonic Image App” or “LUMIX”, and install the app.

• Use the latest version.

• Some smartphones/tablets may not work correctly. For information on the “Image App”, 

refer to the support site below.
http://panasonic.jp/support/global/cs/dsc/

R

R

R

Press and hold [Wi-Fi].
• The QR code will be displayed on the camera screen.

Install the profile of “IMAGE APP”.
• A message will be displayed on the browser.

• If the smartphone/tablet is locked with a passcode, 

enter the passcode to unlock the smartphone/tablet.

Cancel

SSID: 
Password:

 

Please set on your smartphone

Change method

Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings

SSID

QR code

Panasonic Corporation

∫ Entering a password to set up a connection

Press and hold [Wi-Fi].
• The Password will be displayed on the camera screen.

Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.

Enter the password displayed on the screen of the 
camera.
• If you are using an Android device, marking the box for 

password display will allow the device to display the 
password as you enter it.

∫ Recording images with the smartphone/tablet (remote recording)

• The recorded images are saved in the camera.

• Motion pictures cannot be recorded.

∫ Playing back the camera’s images on the 

• Images in the camera are displayed on the screen 

of the smartphone/tablet.

Touch an image to enlarge it.
• Motion pictures cannot be played back.

∫ Saving the camera’s images in the smartphone/tablet

Press and hold an image, and drag it to save 
it on the smartphone/tablet.
• Motion pictures cannot be saved.

∫ Sending location information to the camera from a smartphone/tablet
You can acquire location information from a smartphone/tablet, and write it on images afterwards.
• Read the [Help] in the “Image App” menu for further details on how to operate.

To send pictures to a PC, you need to create a destination folder on the PC in advance.
• Create a PC user account [account name (up to 254 characters) and password (up to 

32 characters)] consisting of alphanumeric characters.
An attempt to create a receive folder may fail if the account includes non-alphanumeric 
characters.

Turn on the Wi-Fi function in the setting menu of the smartphone/tablet.

Return to the home screen, and then start “Image App”.
• Steps 

 through 

 are not required from the second time on.

Press and hold [Wi-Fi].
• The QR code will be displayed on the camera screen.

Wi-Fi

Wi-Fi

0123456789ABC

Cancel

SSID: 
Password:

 

Please set on your smartphone

Change method

Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings

QR code

Cancel

SSID: 
Password:

 

Please set on your smartphone

Change method

Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings

SSID

Password

Wi-Fi

0123456789ABC

(For Windows)
Supported OS: Windows

R

 XP/Windows Vista

R

/Windows

R

 7/Windows

R

 8/Windows

R

 8.1

Example: Windows 7

Select [Properties], then enable sharing of the folder.
• For details, refer to the operating instructions of your PC or Help on the OS.

(For Mac)
Supported OS: OS X v10.5 to v10.9
Example: OS X v10.8

> [Get Info]

Enable sharing of the folder.
• For details, refer to the operating instructions of your PC or Help on the OS.

You can send pictures and motion pictures recorded with this unit to a PC.
The connection methods described in this manual are examples. For details on other 
connection methods, refer to “Owner’s Manual for advanced features (PDF format)”.
Preparations:

• If the workgroup of the destination PC has been changed from the standard setting, you also 

need to change the setting of this unit in [PC Connection].

Press 3/4/2/1 to select [New Connection], and then press [MENU/SET].

Press 3/4 to select the sending method.

Press 3/4 to select [PC], and then press [MENU/SET].

• When the PC you want to connect to is not displayed, select [Manual Input], and enter 

the computer name of the PC (NetBIOS name for Apple Mac computers).

• Folders sorted by the sent date are created in the specified folder, and pictures are saved in 

those folders.

• If the screen for a user account and password entry appears, enter the one you set on your PC.

• When the computer name (NetBIOS name for Apple Mac computers) contains a space 

(blank character), etc., it may not be recognized correctly. If a connection attempt fails, we 

recommend that you change the computer name (or NetBIOS name) to the one consisting of 

only alphanumeric characters, with a maximum of 15 characters.

Press 3/4 to select [PC], and then press [MENU/SET].

Drag and drop files and folders in the camera to the PC.
• When the image transfer is complete, disconnect the USB connection cable safely.

1 Select [Via Network].
2 Select [WPS (Push-Button)].

3 Press and hold the WPS button of the wireless 

access point until it switches to WPS mode.

(Example)

[Send Images While Recording]
1 Select the PC you want to connect to and the destination folder.
2 Take a picture with the camera.

[Send Images Stored in the Camera]
1 Select the PC you want to connect to and the destination folder.
2 Select [SINGLE] or [MULTI], and then select the images you want to send.

Cancel

Select

Set

Select a function

Remote Shooting & View

Send Images While Recording

Send Images Stored in the Camera

Cancel

Select

Set

Select connection method

Via Network

Direct

Connect to the

network (AP)

• This socket is also used 

when charging the battery.

∫ Playback and editing on a PC
Software for image playback or editing is not supplied with this product.

QuickTime/iTunes, provided by Apple

(Software supporting MP4 format is required.)

• If software is not installed on your PC, download it from the website of the software provider.

• For information on how to use software, contact the software provider.

• This phenomenon occurs when charging in a location where the temperature is very high or 

very low.

> Reconnect the USB connection cable (supplied) in a location where the ambient 

temperature (and the temperature of battery) is in a 10 oC to 30 oC  (50 oF to 86 oF) 

range, and try charging again.

• This is characteristic of MOS sensors which serve as the camera’s pickup sensors.

This is not a malfunction.

• This is characteristic of MOS sensors which serve as the camera’s pickup sensors. It 

appears when the subject has a bright part. Some unevenness may occur in the surrounding 

areas, but this is not a malfunction.

It is recorded in still pictures or motion pictures.

(General tips for using a Wi-Fi connection)
• Use within the communication range of the device to be connected.

• Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency 

operated nearby?

> Radio waves may get interrupted when used simultaneously. Use them sufficiently away 

from the device.

• When the battery indicator is flashing red, the connection with other equipment may not start 

or the connection may be disrupted.

(A message such as [Communication error] is displayed.)

(About a wireless access point)
• Check if the wireless access point to connect is in operating state.

• The camera may not display or connect to a wireless access point depending on the radio 

wave condition.

– Move this unit closer to the wireless access point.

– Remove the obstacles between this unit and the wireless access point.

– Change the direction of this unit.

– Change the location and orientation of the wireless access point.

– Perform the [From List].

• It may not display even if the radio waves exist depending on the setting of the wireless 

access point.

> Check the settings of the wireless access point.

> When the network SSID of the wireless access point is set not to broadcast, the wireless 

access point may not be detected. Enter the network SSID to start the connection or 

enable the SSID broadcast of the wireless access point.

• Connection types and security setting methods are different depending on the wireless 

access point. (Refer to the operating instructions of the wireless access point.)

• Is the 5 GHz/2.4 GHz switchable wireless access point connected to other equipment using 

the 5 GHz band?

> The use of a wireless access point that can use 5 GHz/2.4 GHz simultaneously is 

recommended. It cannot be used simultaneously with this camera if it is not compatible.

• It may take longer time to connect depending on the Wi-Fi connection setting of the 

smartphone/tablet, but it is not a malfunction.

• Is the size of the image too large?

> Reduce the size of the still picture, then transmit.

> Image cannot be transmitted when the battery indicator is flashing red.

Specifications are subject to change without notice.
Digital Camera: Information for your safety

If the problem is not resolved, it may be improved by selecting [Reset] on the [Setup] menu.

DC 5 V

1.5 W (When recording)
1.0 W (When playing back)

16,000,000 pixels

1/2.33q MOS sensor, total pixel number 17,500,000 pixels, 
Primary color filter

Optical 20k zoom, fl4.3 mm to 86.0 mm (35 mm film camera 
equivalent: 24 mm to 480 mm)
Wide: F3.3 to F8.0
Tele: F6.4 to F8.0

Optical method

Normal

50 cm (1.6 feet) (Wide)/2.0 m (6.6 feet) (Tele) 
to ¶

Macro/
Intelligent auto/
Motion picture

3 cm (0.098 feet) (Wide)/1.0 m (3.3 feet) 
(Tele) to ¶
[5k to 7k is 2.0 m (6.6 feet) to ¶]

Scene Mode

There may be differences in the above 
settings.

AC Adaptor (Panasonic VSK0768):
Information for your safety

Battery Pack (lithium-ion) (Panasonic DMW-BCM13PP):
Information for your safety

This product incorporates the following software:

(1) the software developed independently by or for Panasonic Corporation,

(2) the software owned by third party and licensed to Panasonic Corporation and/or,

(3) open source software

The software categorized as (3) is distributed in the hope that it will be useful, but WITHOUT 

ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS 

FOR A PARTICULAR PURPOSE.

Please refer to the detailed terms and conditions thereof displayed by selecting [MENU/SET] 

> [Setup] > [Version Disp.] > [MENU/SET].
• SDXC Logo is a trademark of SD-3C, LLC.

• HDMI, the HDMI Logo, and High-Definition Multimedia Interface 

are trademarks or registered trademarks of HDMI Licensing LLC 

in the United States and other countries.

• QuickTime and the QuickTime logo are trademarks or registered 

trademarks of Apple Inc., used under license therefrom.

• iPhoto, iTunes, Mac and Mac OS are trademarks of Apple Inc., 

registered in the U.S. and other countries.

• iPad, iPhone, iPod, and iPod touch are trademarks of Apple Inc., 

registered in the U.S. and other countries.

• Windows and Windows Vista are either registered trademarks or 

trademarks of Microsoft Corporation in the United States and/or 

other countries.

• App Store is a service mark of Apple Inc.

• Android and Google Play are trademarks or registered 

trademarks of Google Inc.

• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi 

Alliance.

• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

• “Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or 

registered marks of the Wi-Fi Alliance.

• QR Code is a registered trademark of DENSO WAVE 

INCORPORATED.

This product is licensed under the AVC patent portfolio license for 

the personal and non-commercial use of a consumer to (i) encode 

video in compliance with the AVC Standard (“AVC Video”) and/or (ii) 

decode AVC Video that was encoded by a consumer engaged in a personal and 

non-commercial activity and/or was obtained from a video provider licensed to provide AVC 

Video. No license is granted or shall be implied for any other use. Additional information may 

be obtained from MPEG LA, LLC. See http://www.mpegla.com .

Electronic shutteriMechanical shutter

Approx. 10 lx (when i-low light is used, the shutter speed is 1/30th 

of a second)

4 seconds to 1/2000th of a second

[Starry Sky] Mode: 15 seconds, 30 seconds

Program AE (P)/Aperture-Priority AE (A)/

Shutter-Priority AE (S)/Manual Exposure (M)

Multiple/Center weighted/Spot

3.0q TFT LCD (3:2)

(Approx. 460,000 dots) (field of view ratio about 100%)

Monaural

Monaural

Built-in Memory (Approx. 70 MB)/SD Memory Card/SDHC 

Memory Card/SDXC Memory Card

JPEG (based on “Design rule for Camera File system”, based on 
“Exif 2.3” standard)/DPOF corresponding

MP4

AAC

“USB 2.0” (High Speed)

NTSC

Audio line output (monaural)

Dedicated jack (8 pin)

MicroHDMI TypeD

Approx. 106.8 mm (W)k62.2 mm (H)k32.4 mm (D)

[4.21q(W)k2.45q(H)k1.28q(D)]

Approx. 250 g/0.55 lb (with card and battery)

Approx. 224 g/0.49 lb (excluding card and battery)

Operating temperature 0 oC to 40 oC (32 oF to 104 oF)
Operating humidity

10%RH to 80%RH

[ENGLISH]/[ESPAÑOL]

IEEE 802.11b/g/n (standard wireless LAN protocol)

2412 MHz to 2462 MHz (1 to 11ch)

Wi-Fi compliant WPA

TM

/WPA2

TM

Infrastructure mode

110 V to 240 V, 50/60 Hz, 0.2 A

5 V, 800 mA

3.6 V/1250 mAh

VQT5H07~P_eng.fm  2 ページ  ２０１４年１月２２日　水曜日　午後５時３６分