Panasonic GH3KBODY User Manual
32
Preparation
Access to the card
The access indication displays red when pictures are being recorded on
the card.
The access indication displays red when pictures are being recorded on
the card.
•
During access (image writing, reading and deleting, formatting etc.), do not turn this unit
off, remove the battery, card or disconnect the AC adaptor (optional). Furthermore, do
not subject the camera to vibration, impact or static electricity.
The card or the data on the card may be damaged, and this unit may no longer operate
normally.
If operation fails due to vibration, impact or static electricity, perform the operation
again.
off, remove the battery, card or disconnect the AC adaptor (optional). Furthermore, do
not subject the camera to vibration, impact or static electricity.
The card or the data on the card may be damaged, and this unit may no longer operate
normally.
If operation fails due to vibration, impact or static electricity, perform the operation
again.
•
Write-Protect switch
A
provided (When this switch is set to the [LOCK] position,
no further data writing, deletion or formatting is possible. The ability to write,
delete and format data is restored when the switch is returned to its original
position.)
delete and format data is restored when the switch is returned to its original
position.)
•
The data on the card may be damaged or lost due to electromagnetic waves,
static electricity or breakdown of the camera or the card. We recommend storing
important data on a PC etc.
static electricity or breakdown of the camera or the card. We recommend storing
important data on a PC etc.
•
Do not format the card on your PC or other equipment. Format it on the camera only to ensure
proper operation.
proper operation.
•
Keep the Memory Card out of reach of children to prevent swallowing.
Since data cannot be recovered after formatting, make sure to back up necessary
data in advance.
data in advance.
Select [Format] in the [Setup] menu.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Formatting the card (initialisation)
2