Panasonic HDC-Z10000P User Manual
25
VQT3U98
The viewfinder is turned off and the LCD monitor is turned on when the LCD monitor is
extracted. The viewfinder is turned on when the LCD monitor is retracted.
It is possible to check the images recorded during 3D recording or scenes recorded in 3D as
3D when LCD monitor is used.
extracted. The viewfinder is turned on when the LCD monitor is retracted.
It is possible to check the images recorded during 3D recording or scenes recorded in 3D as
3D when LCD monitor is used.
Using the LCD monitor
1
Extract the LCD monitor in the
direction as indicated in the
figure
direction as indicated in the
figure
≥ Hold the LCD monitor extract part A when
pulling out.
2
Rotate to the position that is easy to
view
view
To retract the LCD monitor
Retract as shown in the figure with the LCD facing
downward.
downward.
Range of rotation of the LCD monitor
≥ It can rotate up to 270o B towards the lens.
Preparation
Using the LCD monitor/Viewfinder
≥ There are differences in the way that different people experience 3D images.
Check from a position directly in front of and at around 30 cm (0.98 feet) from the
LCD monitor, where you can easily see picture.
LCD monitor, where you can easily see picture.
HDC-Z10000P-VQT3U98_mst.book 25 ページ ２０１１年１０月４日 火曜日 午後３時２分