Panasonic HDC-Z10000P User Manual
61
VQT3U98
Adjusting the audio input level
∫ Adjusting the input level of the built-in microphone (5.1 ch)
≥ Set the [MIC SETUP] to anything other than [2ch]. (
l 57)
1
Select the menu.
2
(When [SET]/[SETr
] is selected)
Touch
/
to adjust the microphone
input level.
≥ Touch
to activate/disactivate ALC. When ALC is
activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When
ALC is disactivated, natural recording can be
performed.
amount of sound distortion can be reduced. When
ALC is disactivated, natural recording can be
performed.
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the
sound is distorted.) Select a lower setting for
microphone input level.
sound is distorted.) Select a lower setting for
microphone input level.
3
Touch [ENTER] to set the microphone
input level and then touch [EXIT].
input level and then touch [EXIT].
≥
is displayed on the recording screen when the ALC is turned on.
≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom
rate.
≥ You cannot record with the audio completely muted.
: [RECORD SETUP]
# [5.1ch MIC LEVEL] # desired setting
[AUTO]:
ALC is activated, and the recording level is adjusted
automatically.
automatically.
[SET]/[SETr
]:
The desired recording level can be set.
MENU
A Center
B Front left
C Back left
D Front right
E Back right
F Microphone input level
B Front left
C Back left
D Front right
E Back right
F Microphone input level
HDC-Z10000P-VQT3U98_mst.book 61 ページ ２０１１年１０月４日 火曜日 午後３時２分