Panasonic DMC-TZ8 User Manual
12
VQT2T07 (ENG)
(ENG) VQT2T07
13
Inserting and removing the card
(optional)/the battery
■
To remove
•To remove battery:
move lever in direction of arrow.
•To remove card:
press down in centre.
Lever
●
Always use genuine Panasonic batteries (DMW-BCG10E).
●
If you use other batteries, we cannot guarantee the quality of this
product.
●
The card may be damaged if it is not fully inserted.
●
Keep the Memory Card out of reach of children to prevent swallowing.
Set the camera ON/OFF switch
to OFF and slide the release
lever ( A ) to [OPEN] before
opening the lid
Completely insert battery and
Completely insert battery and
card
•Battery: Push in until the lever is locked
•Memory card: Push in until it clicks
B
Do not touch terminal
C
Check orientation
Close lid
Slide to the [LOCK] position.
Picture save destination (cards and built-in memory)
■
Built-in memory (approx. 40 MB)
●
The built-in memory can be used as a temporary storage device when the
card being used becomes full.
●
The access time for the built-in memory may be longer than the access time
for a card.
■
Compatible memory cards (optional)
The following SD standard-based cards
(Panasonic brand recommended)
Type of Card
Capacity
Notes
SD memory
cards
8 MB – 2 GB
•Can be used with devices
compatible with the
respective formats.
•Before using SDXC memory
cards, check that your
computer and other devices
support this type of card.
http://panasonic.net/avc/
sdcard/information/SDXC.
html
•Cards in capacities not listed
at left are not supported.
SDHC memory
cards
4 GB – 32 GB
SDXC memory
cards
48 GB – 64 GB
●
If the write-protect switch is set to ‘LOCK’, the card cannot be used to
record or delete pictures, and it cannot be formatted.
●
Latest information:
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Switch (LOCK)
[OPEN] [LOCK]
B
C
A