Panasonic DMC-ZS19 User Manual

Page of 197
- 178 -
 Q&A
  
Troubleshooting
Try checking these items (
If the problem persists, performing [Reset] in the [Setup] menu may resolve the issue 
(
their values at the time of purchase.)
Battery, power
The charging lamp turns off before the battery is fully charged.
 
Charging is being performed in a place with extremely high or low temperature. 
 
→  Reconnect the USB connection cable (supplied) and retry charging in a place where ambient 
temperature is 10 °C to 30 °C (50 °F to 86 °F) (temperature conditions also apply to the battery 
itself). 
(When the USB connection cable is reconnected after the battery is fully charged, the charging 
lamp will light for approximately 15 seconds.)
Camera does not work even if power is turned on.
 
Battery is not inserted correctly (
LCD monitor shuts off even if power is turned on.
 
[Sleep Mode] is activated. (
 
→  Press shutter button halfway to release.
 
Battery needs recharging.
Camera switches off as soon as power is turned on.
 
Battery needs recharging.
 
[Sleep Mode] is activated. (
 
→  Press shutter button halfway to release. 
This unit is turned off automatically.
 
If you connect to a TV compatible with VIERA Link (HDMI) with an HDMI mini cable (optional) and 
turn off the power on the TV with the remote control for the TV, the power on this unit also turns off.
 
→  If you are not using VIERA Link (HDMI), set [VIERA Link] to [OFF]. (→59)
GPS 
DMC-ZS20
Cannot perform positioning.
 
When [GPS Setting] is set to [OFF]. (
 
Depending on the recording environment, such as when indoors or near buildings, it may not be 
possible to correctly receive the signals from the GPS satellites. (
128)
 
→  When using the GPS, we recommend holding the camera still for a while with the Built-in GPS 
antenna facing upward in an outdoor location where you can see the entire sky.
The GPS status indicator lights up while the camera’s power is off.
 
[GPS Setting] is [ON].
 
→  Electromagnetic waves from the camera can affect instruments and meters. During takeoff and 
landing of airplanes or in other restricted areas, set [GPS Setting] to [OFF] or set [Airplane Mode] 
to [ON], and then turn off the camera.