Panasonic BM-ET500 User Manual

16

There is two ways of identification:

• Iris recognition
• ID-and-password authorization

Note: When  “READY” is blinking, recognition will be

unavailable. Wait until the indicator is on, not blinking.

■ Iris Recognition

The procedures are as follows.

1. Stand in front of the unit and turn your face to the center

front panel.
Stop at the point you can see the two guidance indica-
tors simultaneously, and then turn your face to the unit.

2. The guidance indicators will automatically light up, and

iris recognition will start. Then, the buzzer will beep
briefly.

3. Status indicator q will light up.

Note: Depending on the distance between you and the

unit, status indicators will blink as shown in Figure 1
or 2. When the indicators show Figure 1 status,
come closer to the unit. When the indicators show
Figure 2 status, go farther from the unit.

4. The status indicators will light up in the order shown in

the figure.
When all indicators have lighten up, the recognition will
be finished.

5. When recognition has been successfully executed,

ACCEPT will light up and the buzzer will beep.
When recognition has not been successfully executed
(or you have not been enrolled to the unit), REJECT will
light up and the buzzer will beep.

ACCEPT

REJECT

READY

Guidance indicators

ACCEPT

REJECT

READY

Light up

ACCEPT

REJECT

READY

The indicator lights up.

q

Blinking

(Figure 1)

(Figure 2)

The distance is too long.

Blinking

The distance is too short.

ACCEPT

REJECT

READY

Light up 
one by 
one

q

ACCEPT

REJECT

READY

ACCEPT

REJECT

READY

Lights 
up