Panasonic DMC-FX9PP User Manual

Connecting to a PC or Printer

96

VQT0S57

By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to be printed or start printing 
on the LCD monitor.
Set the print settings such as print quality 
on the printer beforehand. (Read the printer 
operating instructions.)

A: USB connection cable (supplied)
B: AC adaptor (DMW-AC5; optional)
• Turn off the camera before inserting or 

removing the cable for the AC adaptor 
(DMW-AC5; optional).

A 

• Connect the USB connection cable with 

the [

] mark facing the [

2] mark on 

the [DIGITAL] socket.

• Hold the USB connection cable at 

C 

and insert straight in and take straight 
out.

• It may take time to print some pictures. 

Therefore, use a battery with sufficient 
battery power (P14) or the AC adaptor 
(DMW-AC5; optional) when you connect 
to a printer.

• If the remaining battery power becomes 

low during communication, the battery 
indication turns red and blinks (P14) and 
the alarm beeps. In this case, stop the 
communication at once.

• Disconnect the USB connection cable 

after printing.

• Do not use any other USB connection 

cables except the supplied one.

• For printing the age in [BABY] (P60) in 

scene mode, print from a PC using the 
software [LUMIX Simple Viewer] in the 
CD-ROM (supplied). For details, refer to 
the separate operating instructions for PC 
connection.

• To find out more PictBridge compliant 

printers, please contact your local dealer.

When the DPOF 
Print is not set.

Select [SINGLE 
PICTURE]. (P97)

When the DPOF 
Print is set. (P83)

Select [DPOF 
PICTURE]. (P98)