Panasonic DMC FZ 28 User Manual
VQT1S36
112
Connecting to other equipment
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
•
You can easily print out or mail the pictures you have imported. Use of the
“
PHOTOfunSTUDIO-viewer-
”
bundled software on the CD-ROM (supplied) is a convenient
way of doing this.
•
Read the separate operating instructions for the supplied software for more information about
the software in the CD-ROM (supplied) and how to install it.
the software in the CD-ROM (supplied) and how to install it.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Connect the camera to a PC via the USB connection cable
A
(supplied).
•
Do not use any other USB connection cables except the supplied one. Use of
cables other than the supplied USB connection cable may cause malfunction.
cables other than the supplied USB connection cable may cause malfunction.
Press
3/4 to select [PC], and then press [MENU/
SET].
•
If [USB MODE]
(P28)
is set to [PC] in the [SETUP] menu in
advance, the camera will be automatically connected to the PC
without displaying the [USB MODE] selection screen. Since
there is no need to set this each time you connect to the PC, it is
convenient.
without displaying the [USB MODE] selection screen. Since
there is no need to set this each time you connect to the PC, it is
convenient.
A USB connection cable (supplied)
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
C AC adaptor (DMW-AC7PP; optional)
C AC adaptor (DMW-AC7PP; optional)
•
Use a battery with sufficient battery power or the AC adaptor (DMW-AC7PP; optional). If the
remaining battery power becomes low during USB connection, the alarm beeps. Refer to
remaining battery power becomes low during USB connection, the alarm beeps. Refer to
“
Disconnecting the USB connection cable safely
”
(P113)
before disconnecting the USB
connection cable. Otherwise, data may be destroyed.
USB MODE
SELECT
SET
PLEASE SELECT
THE USB MODE
THE USB MODE
PictBridge(PTP)
PC
MENU
DMC-FZ28P_PC.book 112 ページ ２００８年７月２日 水曜日 午後１１時１４分