Panasonic DMC-LC80PP User Manual
Playback (advanced)
97
Connecting to a PC (Mass Storage)
• DMC-LC80/DMC-LC70 is illustrated
below as an example.
A AC adaptor (optional, DMW-AC1)
B USB connection cable
B USB connection cable
1
Turn the camera on and then set
[USB MODE] to [Mass Storage].
(P95)
[USB MODE] to [Mass Storage].
(P95)
2
Connect the camera to a PC via
the USB connection cable
(supplied).
the USB connection cable
(supplied).
• Align the
2 mark on the USB
connection cable and the
1 mark on
the [DIGITAL] socket.
[Windows]
The drive appears on the
[My Computer] folder.
• If it is the first time you are
The drive appears on the
[My Computer] folder.
• If it is the first time you are
connecting the camera to a PC, the
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then it appears on
the [My Computer] folder.
required driver is installed
automatically so that the camera
can be recognized by the Windows
Plug and Play, then it appears on
the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
The drive is shown on the screen.
¬Suggestions/Tips ¬
• The status indicator lights during
communication.
• When connecting to a PC, we
recommend using the AC adaptor
(optional, DMW-AC1) as the power
source.
(optional, DMW-AC1) as the power
source.
• If the remaining battery power
becomes low during communication,
the power indicator blinks and the
alarm beeps. In this case, stop the
communication, because the data may
be destroyed. Then turn the camera
off and use the following power
source.
the power indicator blinks and the
alarm beeps. In this case, stop the
communication, because the data may
be destroyed. Then turn the camera
off and use the following power
source.
• New batteries
• Charged batteries
• AC adaptor (optional, DMW-AC1)
• Charged batteries
• AC adaptor (optional, DMW-AC1)
• Do not use any other USB connection
cables except the supplied one.
A
B
DMC-LC80.book 97 ページ ２００４年６月１５日 火曜日 午後５時４９分