Panasonic DMC-FZ50 User Manual

112

VQT0X92

You can acquire recorded pictures to a PC 
by connecting the camera and the PC.
The software [LUMIX Simple Viewer] or 
[PHOTOfunSTUDIO-viewer-] 
(for Windows

®

) in the CD-ROM (supplied) 

allows you to easily acquire pictures 
recorded with the camera to a PC, print 
them and send them by e-mail.
If you use “Windows 98/98SE”, install 
the USB driver and then connect it to 
the computer.
For information about installing [LUMIX 
Simple Viewer] or 
[PHOTOfunSTUDIO-viewer-] etc., refer to 
the separate operating instructions for PC 
connection.

: USB connection cable (supplied)
: AC adaptor (DMW-AC7; optional)
• Use a battery with sufficient battery power 

or the AC adaptor (DMW-AC7; optional).

• Turn the camera off before inserting or 

removing the cable for the AC adaptor 
(DMW-AC7; optional).

• Connect the USB connection cable with 

the [

] mark facing the [

] mark on 

the [DIGITAL] socket.

• Hold the USB connection cable at 

and insert straight in or take straight 
out. (If you forcibly insert the USB 
connection cable at a slant or upside 
down you can deform the connection 
terminals and damage the camera or 
the connected equipment.)

: This message appears during data 

transfer.

3 Press  to select [PC] and then 

• If you set [USB MODE] in the [SETUP] 

menu to [PC] in advance, it is not 
necessary to set this every time you 
connect to a PC. (P30)

• If you set [USB MODE] to [PictBridge 

(PTP)] and then connect the camera to 
the PC, messages may appear on the 
screen of the PC.
Select [Cancel] to close the messages 
and disconnect the camera from the 
PC. Set [USB MODE] to [PC] again.

REMOTE

DC IN 8.4V

AV OUT/

DIGITAL

ACCESS

USB MODE

SELECT

SET

PictBridge(PTP)

PC

PLEASE SELECT
THE USB MODE

SET

MENU