Panasonic DMC-FZ50 User Manual
Advanced
55
VQT0X92
Taking Pictures using
Burst Mode
Burst Mode
1 Press and hold the burst mode
button.
2 Press / to select a mode.
• You can also press the burst mode
button to select.
3 Press [MENU/SET].
• You can also press the shutter
button halfway to finish.
• The menu screen disappears after
about 5 seconds. At this time, the
selected item is automatically set.
selected item is automatically set.
4 Take a picture.
• Hold down the shutter button fully to
activate the burst mode.
w Number of pictures recorded in burst
mode
_ The burst speed is constant regardless
of the transfer speed of the card.
• The number of pictures indicated is when
the shutter speed is faster than 1/60 and
the flash is not activated.
the flash is not activated.
• The burst speed (pictures/second) may
become slower in dark places etc.
depending on the recording environment.
depending on the recording environment.
• When the burst mode setting is set to
Unlimited
– You can take pictures until the capacity
– You can take pictures until the capacity
of the card is full.
– The burst speed will become slower halfway.
The burst speed of a MultiMediaCard
becomes even slower than that of an SD
Memory Card or SDHC Memory Card.
However, the exact timing of this
depends on the number of recordable
pictures and the card.
becomes even slower than that of an SD
Memory Card or SDHC Memory Card.
However, the exact timing of this
depends on the number of recordable
pictures and the card.
• The focus is fixed when the first picture is taken.
• When the self-timer is used, the number
• When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
fixed to 3.
• Burst mode is not canceled when the
camera is switched off.
• When auto bracket and burst mode are
set simultaneously, auto bracket will be
performed.
performed.
• The exposure and the white balance vary
depending on the burst mode setting.
When burst mode is set to [
When burst mode is set to [
], they are
fixed to the values set for the first picture.
When the burst speed is set to [
When the burst speed is set to [
] or
[
], they are adjusted each time you
take a picture.
• When burst mode is set, the auto review
function is activated regardless of the auto
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
• When burst mode is activated,
[AUDIO REC.] cannot be used.
• When the flash is activated, you can take
only 1 picture.
• You cannot take pictures in burst mode
when the quality is set to [RAW] or
[STARRY SKY] in scene mode is selected.
[STARRY SKY] in scene mode is selected.
Burst speed
(pictures/
second)
Number of recordable
pictures (pictures)
2
_
max. 3
max. 5
1
_
approx. 1
Depends on the
remaining capacity of the
card.
remaining capacity of the
card.
BURST SHOOTING
SELECT
SET
MENU
OFF
HIGH SPEED
LOW SPEED
UNLIMITED
LOW SPEED
UNLIMITED