Panasonic DMC-FZ50 User Manual

Page of 144
Advanced
58
VQT0X92
– Slow sync./Red-eye reduction [
] (P47)
– [AUTO] or [
] in ISO sensitivity 
(P85) (The ISO sensitivity is 
automatically set to [ISO100] when you 
switch from [AUTO] to Aperture-priority 
AE or Shutter-priority AE.) 
• The aperture value and the shutter speed 
turn red when the exposure is not 
adequate.
• We recommend using a tripod when the 
shutter speed is slow.
Manual exposure
Determine the exposure by manually 
setting the aperture value and the shutter 
speed.
1 Rotate the front or rear dial to the 
left or right to set the aperture 
value or the shutter speed.
2 Press the shutter button halfway.
• The manual exposure assistance 
appears for about 10 seconds to 
indicate the exposure.
• Set the aperture value and the shutter 
speed again when the exposure is not 
adequate.
3 Take a picture.
Manual Exposure Assistance
• The manual exposure assistance is an 
approximation. We recommend checking 
the pictures after taking them using the 
review function.
• Refer to P59 for the available aperture 
values and the shutter speed.
• You cannot set the following items in 
manual exposure.
– Slow sync./Red-eye reduction [
(P47)
– [AUTO] or [
] in ISO sensitivity 
(P85) (The ISO sensitivity is 
automatically set to [ISO100] when you 
switch from [AUTO] or [
] to Manual 
exposure.)
– Exposure compensation (P52)
• The brightness of the screen may differ 
from the brightness of the actual pictures. 
Check the pictures using the review 
function or playback mode.
• If the exposure is not adequate, the 
aperture value and the shutter speed turn 
red when the shutter button is pressed 
halfway.
Set the aperture value.
Set the shutter speed.
ISO100
3
1/30
F2.8
1/125
F4.0
The exposure is 
adequate.
Set to faster shutter 
speed or larger aperture 
value.
Set to slower shutter 
speed or smaller 
aperture value.
1/125
F5.6