Panasonic DMC-FZ3GN User Manual

Page of 112
Recording pictures (advanced)
51
Recording pictures (advanced)
Using the Mode Dial
When you want the background to be in 
sharp focus, set the aperture value to a 
higher number. The higher the aperture 
value is the smaller the aperture opening 
will be. For a soft focus background, set the 
aperture value to a lower number which 
corresponds to a larger aperture opening.
1 Set the aperture value and take 
the picture. 
• Refer to P55 for the available range of the 
aperture value and the shutter speed.
• The focus range is 5 cm –
¶ (Wide), 
120 cm –
¶ (Tele).
• If the subject is too bright, set to larger 
aperture value, if too dim, set to smaller 
aperture value.
• The brightness of the screen may differ 
from that of the actual pictures. Check it 
using review function or setting to the 
playback mode.
• The ISO sensitivity cannot be set to 
[AUTO]. (P68) (When the recording mode 
is switched to Aperture-priority AE, the 
ISO sensitivity is automatically set to 
[ISO100] even though it was set to [AUTO] 
beforehand.)
• When the exposure is not adequate, the 
aperture value and the shutter speed on 
the screen turn red.
Aperture-priority AE
F2.8
EXPOSURE
ISO
100
19
2016
FZ3-GN.book  51 ページ  2004年7月27日 火曜日 午前9時25分