Panasonic DMC-FZ3GN User Manual
Connecting to a PC or Printer
93
Connecting to a PC
• If you use Windows 98/98SE, install the
USB driver and then connect it to the
computer.
computer.
• When using Windows Me/2000/XP, Mac
OS 9.x and Mac OS X, you do not have to
install the USB driver.
install the USB driver.
A: USB connection cable (supplied)
B: AC adaptor (DMW-CAC1; optional)
B: AC adaptor (DMW-CAC1; optional)
1 Turn the camera on and set the
[USB MODE] according to the OS
you use.
you use.
• Set to [PC] or [PictBridge (PTP)]. Refer
to “Before Connecting with USB
Connection Cable” on page 91.
Connection Cable” on page 91.
• If [USB MODE] is set to [PictBridge
(PTP)] while Windows XP or Mac OS X
is used, it is connected as PTP.
is used, it is connected as PTP.
2 Connect the camera to a PC via
the USB connection cable
A
(supplied).
• Connect the USB connection cable with
the [
] mark facing you.
• Hold
C and then insert or pull the USB
connection cable straight.
Depending on the USB mode setting, the
indications on the screen may vary. Refer
to page 94.
indications on the screen may vary. Refer
to page 94.
FZ3-GN.book 93 ページ ２００４年７月２７日 火曜日 午前９時２５分