Panasonic DMC-FZ10PP User Manual
Recording pictures (advanced)
52
Taking Pictures with Aperture-priority AE
When you want the background to be in sharp focus, set the aperture value to a
higher number. The higher the aperture value, the smaller the aperture opening will
be. For a soft focus background, set the aperture number to a lower number which
corresponds to a larger aperture opening.
higher number. The higher the aperture value, the smaller the aperture opening will
be. For a soft focus background, set the aperture number to a lower number which
corresponds to a larger aperture opening.
Preparation
• Set the mode dial to [
• Set the mode dial to [
]. (P30)
1
Select [AE MODE] and set it to [A].
• Close the menu by pressing the
[MENU] button after finishing the
setting.
setting.
2
Set the aperture value and take
the picture.
the picture.
¬Suggestions/Tips ¬
• Refer to P56 for the available range of
the aperture value and the shutter
speed.
speed.
• The focus range is 0.16 feet (5 cm) –
¶
(Wide) and 6.56 feet (2 m) –
¶ (Tele).
• If the subject is too bright, set to larger
aperture value, if too dim, set to
smaller aperture value.
smaller aperture value.
• The brightness of the screen may
differ from that of the actual pictures.
Check it using review function or
setting to the playback mode.
Check it using review function or
setting to the playback mode.
• The ISO sensitivity cannot be set to
[AUTO].
• When the exposure is not adequate, of
the aperture and the shutter speed
values on the screen turn red.
values on the screen turn red.
MENU
SET
WB
REVIEW
SET
WB
REVIEW
PICT.SIZE
QUALITY
QUALITY
2304
REC
1
/
4
SETUP
A
M
AE MODE
W.BALANCE
AUTO
S
AE
EXIT
SET
SELECT
MENU
2304
19
1
A
ISO100
SET
WB
REVIEW
EXPOSURE
F2.8
FZ10-PP.book 52 ページ 2003年11月18日 火曜日 午後1時7分