Panasonic DMC-FZ2PP User Manual
Preparation
15
Inserting the Card
[Preparation]
• Check that the power switch is set to [OFF]
• Check that the power switch is set to [OFF]
and the lens is retracted.
• Close the flash. (P37)
[Inserting the card]
1
Slide the lever in the direction of the
arrow to open the Memory Card/
battery door.
arrow to open the Memory Card/
battery door.
2
Insert the card with the label facing
the front of the camera.
the front of the camera.
• Insert the card, pressing gently until it
locks in place. If the card will not insert
freely, it may be reversed. Do not force
the card.
freely, it may be reversed. Do not force
the card.
• Do not touch the connection terminals
on the back side of the card.
3
Close the Memory Card/battery door.
[Removing the card]
1
Open the Memory Card/battery door.
2
Press the card to release.
3
Pull the card out.
4
Close the Memory Card/battery door.
• If the Memory Card/battery door cannot be
completely closed, take the card out and
insert it again.
insert it again.
• If the card cannot be fully inserted, verify
whether the direction of the card is correct.
• We recommend that you use a Panasonic
branded SD Memory Card. (Use only the
genuine card)
genuine card)
• If the card is not fully inserted, the card may
be damaged.
2
2
3
4
OPEN
OPEN
FZ2-PP.book 15 ページ ２００３年９月２６日 金曜日 午後１２時１分