Panasonic DMC-FZ2PP User Manual
Technical use
80
Formatting the Card
Usually, it is not necessary to format the card
(initializing). Format the card when this
message is displayed “MEMORY CARD
ERROR”.
(initializing). Format the card when this
message is displayed “MEMORY CARD
ERROR”.
• If the card has been formatted by a PC or
other equipment, format the card on the
camera again.
camera again.
[Preparation]
• Set the mode dial to playback [
• Set the mode dial to playback [
]. (P25)
1
Press the [MENU] button.
2
Press
3/4 to select [FORMAT] and
then press
1.
3
When this message is displayed
“DELETE ALL DATA ON THE
MEMORY CARD?”, press
“DELETE ALL DATA ON THE
MEMORY CARD?”, press
2 to select
[YES].
4
Press the
4/[REVIEW/SET] button.
• The card is formatted.
• After formatting, recorded images and
• After formatting, recorded images and
any other data cannot be recovered.
• When the remaining power is low, use the AC adaptor.
• During formatting, do not turn the power off.
• If the card cannot be formatted, consult your dealer.
• During formatting, do not turn the power off.
• If the card cannot be formatted, consult your dealer.
1
2,3,4
2
TRIMMING
FORMAT
PLAY
2/2
SETUP
SELECT
SET
EXIT
MENU
3
SELECT
SET
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
YES
NO
For USA assistance, please call: 1-800-272-7033 or send e-mail to : digitalstillcam@panasonic.com
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
FZ2-PP.book 80 ページ ２００３年９月２６日 金曜日 午後１２時１分