Panasonic DMC-FZ18 User Manual

Page of 171
Others
118
VQT1F83
Others
Using the MC 
Protector/ND Filter
The MC protector (DMW-LMC46; optional) 
is a transparent filter which affects neither 
the colors nor the amount of light, so it can 
always be used to protect the camera’s 
lens.
The ND filter (DMW-LND46; optional) 
reduces the amount of light to 
approximately 1/8th (equal to adjusting the 
aperture value 3 increments) without 
affecting the color balance.
Close the flash, turn on the digital camera, 
rotate the zoom lever to Tele and then 
attach the MC protector/ND filter with the 
lens barrel on the digital camera extended.
When attaching or removing the MC 
protector/ND filter, hold the ring at the end 
of the lens barrel with your hand so it does 
not rotate and then rotate the MC protector/
ND filter slowly and surely to attach or 
remove it.
Attach the MC protector 
 or ND 
filter 
 with the lens extended.
• Do not attach the MC protector and ND 
filter at the same time.
• If the MC protector/ND filter are tightened 
too much, you may not be able to remove 
them. Do not tighten them too much.
• If the MC protector/ND filter are dropped, 
they may be destroyed. Be careful not to 
drop them when attaching them to the 
camera.
• Be careful not to get a fingerprint, dirt, etc. 
on the MC protector or ND filter when it is 
attached, otherwise the focus may be 
adjusted to the lens, resulting in the 
subject being out of focus.
• MC
W“Multi-coated”
ND
W“Neutral Density”
Screen Display
In recording
Recording in program AE mode [
(Initial setting)
1
Recording mode
2
Flash mode (P40)
3
AF area (P25)
4
Focus (P25)
5
Picture size (P76)
6
1/30
1/30
F2.8
F2.8
10
8
9
4
5
6
1 2
7
3
16
17
13
14
15
11
12
7
10
1
9
8
2
13 12 11
14
15
4
3