Panasonic DMC-FZ18 User Manual

Page of 171
Advanced (Recording pictures)
44
VQT1F83
• When the shutter speed is fast, the flash 
effect may not be sufficient.
• It may take time to charge the flash if you 
repeat taking a picture. Take a picture 
after the access indication disappears.
• When the flash is being charged, the flash 
icon blinks red, and you cannot take a 
picture even when you press the shutter 
button fully.
• When taking a picture with the flash, 
we recommend removing the lens 
hood. In some cases it may not allow 
the scene to be illuminated properly.
• Do not close the flash soon after the flash 
is activated prior to taking pictures due to 
AUTO/Red-eye reduction etc. It causes a 
malfunction.
• The red-eye reduction effect differs 
between people. Also, if the subject was 
far away from the camera or was not 
looking at the first flash, the effect may not 
be evident.
• When using a tele conversion lens 
(optional) or a close-up lens (optional), the 
built-in flash setting is fixed to Forced OFF 
[
]. 
• When you set burst mode or auto bracket, 
only 1 picture is recorded for every flash 
activated.
Taking Pictures with 
the Self-timer
1 Press 
  [ ].
2 Press 
/ to select a mode.
• You can also press 
 [
] to select.
• If you set [10S/3PICTURES], after 
10 seconds the camera takes 3 pictures 
at about 2 second intervals.
3 Press [MENU/SET].
• You can also press the shutter 
button halfway or press the center of 
the joystick to finish.
• The menu screen disappears after 
about 5 seconds. At this time, the 
selected item is automatically set.
4 Press the shutter button halfway 
to focus and then press it fully to 
take the picture.
 Press the shutter button halfway to 
focus.
 Press the shutter button fully to take 
the picture.
• The self-timer indicator 
 blinks and 
the shutter is activated after 10 seconds 
(or 2 seconds).
• When [10S/3PICTURES] is selected, 
the self-timer indicator blinks again after 
the first and the second pictures are 
taken and the shutter is activated 
2 seconds after it blinks.
• If you press [MENU/SET] while the 
self-timer is set, the self-timer setting is 
canceled.
or