Panasonic DMC-FZ35 User Manual
17
(ENG) VQT2G40
Preparation
Setting Date/Time (Clock Set)
•
The clock is not set when the camera is shipped.
Turn the camera on.
•
The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
[PLAYBACK] Mode.)
appears. (This message does not appear in
[PLAYBACK] Mode.)
A [MENU/SET] button
B Cursor buttons
B Cursor buttons
Press [MENU/SET].
Press
2/1 to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press
display format), and press
3/4 to set.
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
•
After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the display reflects the settings that were
performed.
switch to Recording Mode, and check that the display reflects the settings that were
performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
been set, set the clock correctly by following the
“
Changing the clock setting
”
procedure
below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press
1.
•
It can be changed in steps
3
and
4
to set the clock.
•
Once a charged battery has been installed for 24 hours, the clock setting is maintained
for 3 months using the built-in clock battery even without the battery.
for 3 months using the built-in clock battery even without the battery.
Changing the clock setting
DMC-FZ38&FZ35P-VQT2G40_eng.book 17 ページ ２００９年６月３０日 火曜日 午後６時３３分