Panasonic 75/85/95 MXP User Manual

TANDBERG Edge 75/85/95 MXP 

192 

 

 

1.  Set ISDN switch type 
2.  Enter ISDN line numbers (and SPIDs, if required) 
3.  Disable unused lines 

 
Some software versions do not support 6 ISDN lines, therefore some of the Line Setup entries 
may be grayed out.  

Select the type of ISDN network connected to your unit. Note that 1TR6 should only be used if 
you are operating the system behind a PABX.

 

This menu allows you to program the numbers associated with your ISDN line. If you want to use 
this ISDN line, you need to set Enabled On and enter the numbers of your ISDN line. If some of 
the ISDN lines are not to be used, set Enabled Off. Line 1 should always be enabled. National 
ISDN and AT&T Custom ISDN might require SPID numbers associated with your ISDN numbers. 
If you have received two different SPID (Service Profile IDentifier) numbers for each ISDN line 
from your network provider, you must program both. 
 

 
Example*:  
 

 

 

 

Numbers  

SPIDS 

ISDN BRI 1: 

67838498 
67838498 

016783849800 
016783849810 

ISDN BRI 2: 

23478060   
23478070  

012347806000  
012347807000 

ISDN BRI 3:              

23478420 
23478430 

012347842000 
012347843000 

ISDN BRI 4:  

23478520 
23478530 

012347852000 
012347853000 

* Note that some systems has less than 4 BRIs available.

 

Sub address  
  
Using a sub address enables you to connect up to eight ISDN terminals to the same ISDN 
telephone number and line. The terminals are addressed by using different sub addresses. To