Panasonic 75/85/95 MXP User Manual

General Use 

195 

 

 
Remember to restart the system after making changes to IP Settings. This can be done by 
selecting the “Save and Restart” at the bottom of the IP setting menu. Changes in IP Settings 
menu will not have any effect until the system is restarted. 
 
IP Protocol 
 

IP version 4 supported. 
 

IPv6 
 

IP version 6 supported.  IP Address, IP Subnet Mask and Gateway will be disabled. 
 

Both IP version 4 and IP version 6 supported. 
 

 
 
IP-assignment  
 
DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.  
 
Note that for IPv6, DHCP is used for  NTP / DNS Server Addresses. 
 

IP-address, IP-subnet mask and Gateway are not used because the DHCP server 
assigns these parameters. 
 

The system’s IP-address, IP-subnet mask and Gateway must be specified in the IP-
address field. 
 

     
IP-address 
 
IP-address defines the network address of the codec. This address is only used in static mode. In 
DHCP-mode, the assigned IP-address can be found on the Welcome Menu. 
 
IP-subnet mask 
 
IP-subnet mask defines the type of network. This address is only used in static mode. Your LAN-
administrator will provide the correct value for this field. 
 
Gateway 
 
When using DHCP, the default gateway will be set automatically. If the LAN utilizes static IP 
addresses, IP address, subnet mask, and default gateway must be specified by the LAN 
administrator.