Panasonic 75/85/95 MXP User Manual

TANDBERG Edge 75/85/95 MXP 

252 

 

 

 

 

 
The system has several features both to protect from unauthorized use and system access: 
 

 
When Access Code is enabled, the user will be asked to enter an access code before he/she is 
able to make a call. The system will verify if the entered access code is valid by checking the 
code with the allowed codes listed in the access.txt file on the ftp-server in the system. If no 
access.txt file is uploaded to the system, registration of the code will be done without validation. 
E.g. you can enter whatever code you want and have access to the system.  
 
The access.txt file is a plain text file with one line per access code as shown below: 
 

 
1234 
1250 
A1 
B2 
ABC 
 

 
To upload this file to the system, follow these steps: 
 

ƒ  Open a DOS-window and go to the folder where the ‘access.txt’ file is located. 
ƒ  Type ftp <IP-address of your local system). 
ƒ  User: press Enter or enter IP-password. 
ƒ  Type “bin” and press Enter. 
ƒ  Go to the user folder, type “cd user”. 
ƒ  Upload the ‘access.txt’ file, type ‘put access.txt’. 
ƒ  Exit from ftp, type "bye". 

 
Administrator

 
Access to the administrator menu on the system unit can be controlled using password 
protection. You can set the Administrator Password in Menu Settings, in Security or from the 
dataport:  
 
menupassword  set <pin-code>. The pin-code should be maximum 5 - five digits. To erase the 
password, enter an empty pin-code. 
 
Streaming password 
 
By setting a streaming password in the streaming menu on the system, a password has to be 
entered on the streaming client to be able to see the video stream from the system.