Panasonic 75/85/95 MXP User Manual

TANDBERG Edge 75/85/95 MXP 

18 

 

 
The system is controlled with a remote control. Think of the remote control as a mobile phone 
with number keys and call keys. Use the arrow keys and press OK to navigate through the 
menus. The system’s most commonly used functions are also accessible directly from the remote 
control. The Infra Red (IR) sensor for the remote control is located in front of the Camera. There 
is also a second IR-sensor located in the front of the Codec itself, which will be automatically 
enabled if the Camera is not connected. 
 
The remote control (TRC 3) 

 

 
 

1.  Mic Off turns your microphone on and 

off, see 

Mic off

. 

2.  Arrow keys are used for navigation in 

the menu and for moving the camera* 
when the menu is hidden, see 

Navigation

. 

3.  Volume + and – adjusts the Codec 

volume only and not the monitor's 
volume, see 

Volume + and -

. 

4.  The Layout key toggles between full 

screen and different display layouts, see 

Layout

. 

5.  Cancel takes you back one step in the 

menu system. Use Cancel to delete 
characters in an input field, see 

Navigation

. Press and hold the Cancel 

key for 1 second to close the menu. 

6.  Press the Call key to place a call, see 

Make a Call

. 

7.  Camera presets define specific camera 

positions. Move the camera to the 
desired position and press and hold a 
number key for 1 second to save the 
current camera position to that number 
key.  To activate a preset whilst in a call, 
simply press and release that number 
key, see 

Camera Presets

. 

8.  Snapshot takes a snapshot of your video 

only while you are in a call, see 

Take 

New Snapshot

. 

9.  The Presentation key switches to a 

predefined presentation source. If the 
Presentation key is held down for 1 
second then the Presentation video 
sources menu will appear, see 

Presentation Key

. 

10.  Press OK/Menu to show the menu and 

to select menu items, see 

Navigation

.