Panasonic 75/85/95 MXP User Manual

TANDBERG Edge 75/85/95 MXP 

76 

 

 

 

(Optional feature)   
 
PC SoftPresenter is used to display PC images on your system without using a VGA cable (PC 
Presenter). The system and your PC must be connected to the same LAN. In addition, VNC 
(Virtual Network Computing) server software must be installed on the PC. Free software can be 
downloaded from 

http://www.realvnc.com

. Install the software by running the downloaded file. 

 
How to configure the VNC Server software: 
 

1.  Select the following to setup VNC; Windows-Start\All Programs\Highlight 

RealVNC\Hightlight VNC Server\Show User Properties 

2.  Select Accept Socket Connections. 
3.  Select Auto for Display Number. Display Number in the system must then have the value 

0.  

4.  Enter a password in the Password-field. This must correspond with the VNC Settings on 

your system.  

 
 
How to show PC using the PC Soft Presenter and VNC: 
 

1.  Start the VNC software on your PC. 
2.  To use VNC, you must configure 

VNC Settings

. Open VNC Settings in the Presentation 

Settings menu in Control Panel. 

3.  Fill in the IP address of your PC, Display Number and Password. 
4. Press 

Save. 

5.  When you now choose VNC as video source in the Presentation menu, you will see your 

PC using VNC. If a PowerPoint presentation is being displayed then you can scroll 
through the presentation by pressing the up and down arrows on the remote control. VNC 
settings will go back to default when the system goes to standby.