Panasonic WV-BP550 User Manual

The lens mount should be a C-mount or CS-mount (1”-
32UN) and the lens weight should be less than 450

g

(0.99 lbs). If the lens is heavier, both the lens and cam-
era should be secured by using the supporter.
The protrusion at the rear of the lens should be as
shown below:

C-mount:

Less than 13 mm (1/2”)

CS-mount: Less than 8 mm (5/16”)

-11-

1

2

Screws

Flange-back
Adjusting Ring

Before you mount the lens, loosen the two screws
on the ring, and rotate this ring clockwise until it
stops. If the ring is not at the end, the inner glass
or CCD image sensor may be damaged.

1. Mount the lens by turning it clockwise on the lens

mount of the camera.

2. Connect the lens cable to the auto iris lens con-

nector on the side of the camera.