Nortel Networks COOLPIXS570BLUE User Manual

Tech

nic
a

l No
tes

The following table lists the error messages and other warnings displayed in the 
monitor, as well as the solutions for dealing with them.

Display

Problem

Solution

A

O (blinks)

Clock not set.

Set clock.

B

Battery running low.

Prepare to charge or 
change battery.

N
Battery exhausted.

Battery exhausted.

Charge or change battery.

P
Battery temperature 
high

Battery temperature is 
high.

Turn off camera, and allow 
battery to cool down 
before resuming use. After 
5 seconds, this message 
will disappear, the monitor 
will turn off, and the 
power-on lamp and flash 
lamp will blink rapidly. 
After the lamps blink for 
three minutes, the camera 
will turn off automatically. 
Pressing the power switch 
also turns off the camera.

Q (

● blinks red)

Camera cannot focus.

• Refocus.
• Use focus lock.

24, 25
102

P
Please wait for the 
camera to finish 
recording.

Camera cannot perform 
other operations until 
recording is complete.

Wait until message clears 
from display automatically 
when recording is 
complete.

N
Memory card is write 
protected.

Write-protect switch is in 
“lock” position.

Slide write-protect switch 
to “write” position.

P
This card cannot be 
used.

Error accessing memory 
card.

• Use approved card.
• Check that connectors 

are clean.

• Confirm that memory 

card is correctly inserted.

131
18 

P
This card cannot be 
read.