Nortel Networks COOLPIXS570BLUE User Manual

Tech

nic
a

l No
tes

If the camera fails to function as expected, check the list of common problems 
below before consulting your retailer or Nikon-authorized service representative. 
Refer to the page numbers in the right-most column for more information.

Problem

Cause/Solution

A

Monitor is blank.

• Camera is off.
• Battery is exhausted.
• The camera is in standby mode. Press the power 

switch, shutter-release button, A button, or 

c 

button.

• When flash lamp blinks red, wait until flash has 

charged.

• Camera and computer are connected via USB cable.
• Camera and TV are connected via AV cable.

20
20
15, 21

81
79

Monitor is hard to read.

• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.

119
135

Camera turns off without 
warning.

• Battery is low.
• Camera has turned off automatically to save power.
• Battery is cold.

20
124
134

Date and time of 
recording are not correct.

• Pictures recorded before clock has been set, and 

“Date not set” indicator blinks during shooting, will 
have time stamp of “00/00/0000 00:00”; movies will 
be dated “01/01/2009 00:00”. In calendar display or 
list by date mode, pictures are recognized as having 
been taken on 01/01/2009. Set the correct time and 
date from the Date option in the setup menu.

• Check camera clock regularly against more accurate 

timepieces and reset as required.

16, 51

No indicators displayed 
in monitor.

Hide info is selected for Photo info.
Select Show info.

Date imprint not 
available.

Camera clock has not been set.

16, 
116

Date not appearing on 
pictures even when 
Date imprint is enabled.

A shooting mode that does not support date imprint is 
selected.

Camera settings reset.

Backup battery is exhausted; all settings were restored 
to their default values.