Nortel Networks COOLPIXS570BLUE User Manual

Inserting the Battery

First Ste

p

s

Turn the camera off and make sure that the power-on 
lamp and the monitor have gone out before opening 
the battery-chamber/memory card slot cover.

To eject the battery, open the battery-chamber/ 
memory card slot cover and slide the orange battery 
latch in the direction indicated by the arrow (

1

). The 

battery can then be removed by hand (

2

).

• Note that the battery may become hot during use; 

observe due caution when removing the battery.

Press the power switch to turn on the camera. The 
power-on lamp (green) will light for a moment and 
then the monitor will turn on. To turn off the camera, 
press the power switch again.

When the camera is turned off, both the power-on 
lamp and monitor will turn off.

If the camera is turned off, hold down the 

c button to turn the camera on in 

playback mode.

C

If no operations are performed for about a minute (default setting), the monitor will turn off 
automatically and the camera will enter standby mode. If no operations are performed for another 
three minutes, the camera will turn off automatically (the auto off function).

• If the monitor is off in standby mode (the power-on lamp is blinking), press the power switch or 

the shutter-release button to reactivate it.

• The time allowed to elapse from before the camera enters standby mode can be changed from 

the Auto off option (

A 124) in the setup menu (A 112).