Nortel Networks COOLPIXS570RED User Manual

Basic Camera Setup: The Setup Menu

S

h

oot

in

g, 
Pl

ayback

 an
d Se

tu

p 

M

e

n

u

s

i Sound Settings

Adjust the following sound settings.

k Auto Off

When the camera is on and a period of time passes without any operations having 
been performed, the camera will enter standby mode (

A 15) to save power. 

Once the camera has entered standby mode, the power-on lamp will blink, and if 
no operations are performed for another three minutes, the camera will turn off. 

Choose the time allowed to elapse before the camera enters standby mode if no 
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.

C

Cancel standby mode and reactivate the monitor by pressing any of the following buttons.

C

Regardless of the option selected, the monitor will remain on for three minutes when menus are 
displayed, a maximum of 30 minutes during slide show playback, and 30 minutes when the AC 
adapter is connected.

Press the 

d button M z (Setup menu) (A 113) M i Sound settings

Button sound

Turn button sound On or Off.
When On (default setting) is selected, a beep will sound once when operations are 
completed successfully, twice when focus has been locked, and three times when 
an error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Choose shutter sound from On (default setting) or Off.

Press the 

d button M z (Setup menu) (A 113) M k Auto off

• the power switch

• the shutter-release button

•  the A button

• the c button