Panasonic BB-HCE481A User Manual
Operating Instructions
13
1.4
Accessing the Camera
1.
Start up the web browser on your PC.
2.
Enter "http://IPv4 Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
press [Enter] on the keyboard.
•
When the port number is 80 (default), you do not need to include the port
number in the address. See page 50 for details about the port number.
number in the address. See page 50 for details about the port number.
•
For IPv6 connection, see page 15 and page 16, and confirm that your
equipment meets the requirements.
Enter "http://(IPv6-registered URL):Port Number" on the address bar.
equipment meets the requirements.
Enter "http://(IPv6-registered URL):Port Number" on the address bar.
•
If the camera image is not displayed, see "Camera Image/Page Display
Troubleshooting" on page 9 of the Troubleshooting on the CD-ROM.
Troubleshooting" on page 9 of the Troubleshooting on the CD-ROM.
3.
The Enter Network Password window is displayed. Enter the user name and
password that you set previously, and click [OK].
password that you set previously, and click [OK].
Note
•
When [Permit access from guest users] is set on the Security:
Administrator page, the authentication window will not be displayed.
Administrator page, the authentication window will not be displayed.
E.g. http://192.168.0.253:50000 (in IPv4)
http://
.viewnetcam.com:50000 (in IPv6)