Nikon Coolpix S4 User Manual

Page of 108
10
First Steps
Turning the Camera On
Press the power switch until the power-on lamp lights.  
The power-on lamp shows camera status as follows:
Power-on lamp
Camera status
On
On
Blinks
Auto power off (standby mode)
Flickers
Batteries exhausted (
 85)
Off
Off
Basic Setup
The fi rst time the camera is turned on, a language-selection dialog will be 
displayed.  Choose a language and set the time and date as follows:
 Turning the Camera Off
To  turn the camera off, press the power switch again.  The camera is off when the 
power-on lamp is off.  Do not remove the batteries or memory card or disconnect the 
optional AC adapter until the power-on lamp has gone out.
 Auto Power off (Stand-by Mode)
If no operations are performed for about fi ve seconds, the monitor will gradually dim 
to save power.  Full brightness can be restored by pressing the shutter-release button 
or operating any of the controls next to the monitor.  If no operations are performed 
for about a minute, the monitor will turn off and the camera will enter stand-by mode, 
further reducing the drain on the battery (
 78).  The power-on lamp will blink and the 
monitor can be reactivated by pressing the shutter-release button halfway.  The camera 
will turn off automatically if no operations are performed for another three minutes.
2
DATE
DATE
DATE
Confirm
Confirm
Confirm
Set time and date?
No
Yes
Confi rmation dialog displayed.
1
Cancel
Cancel
Confirm
Confirm
Cancel
Confirm
Highlight language.
 *
* Press 
 button to exit without selecting language.
4
TIME ZONE
TIME ZONE
TIME ZONE
Confirm
Confirm
Confirm
DaylightSaving
London, Casablanca
TIME ZONE menu displayed.
 †
3
DATE
DATE
DATE
Confirm
Confirm
Confirm
Set time and date?
No
Yes
Highlight Yes.
† See “The Setup Menu: Date” (
 74) for information on setting daylight saving time.