Nikon D70 User Guide

Page of 218
205
Technical Notes—Specifi
 cations
 Battery Life
The number of shots that can be taken with fully charged batteries varies with the 
con di tion of the batteries, temperature, and how the camera is used.  The following 
examples assume a fully-charged EN-EL3 battery (1400 mAh) or three fresh Sanyo CR2 
batteries inserted in the MS-D70 battery holder at a temperature of 20 °C (68 °F).
Example 1
Zoom Nikkor AF-S DX 18–70 mm f/3.5–4.5G IF ED lens; con tin u ous shoot ing mode; 
con tin u ous-servo autofocus; image quality set to JPEG Basic; im age size set to M
shutter speed ½
50
 s; shut ter-re lease pressed half way for three sec onds and fo cus cycled 
from infi nity to min i mum range three times with each shot; after six shots, mon i tor 
turned on for fi ve seconds and then turned off; cycle re peat ed once exposure meters 
have turned off.
Number of shots (EN-EL3): 2000 
Number of shots (CR2): 560
Example 2
AF-S DX 18–70 mm f/3.5–4.5G IF ED lens; sin gle-frame shoot ing mode; single-ser vo 
autofocus; image qual i ty set to JPEG Normal; im age size set to L; shut ter speed ½
50
 s; 
shut ter-re lease pressed half way for fi ve seconds and fo cus cycled from infi nity to min-
 i mum range once with each shot; built-in Speedlight fi red at full power with every 
other shot; AF-assist illuminator lights when Speedlight is used;  cycle re peat ed once 
exposure meters have turned off; camera turned off for one second with every ten 
shots.
Number of shots (EN-EL3): 400 
Number of shots (CR2): 160
The following can reduce battery life:
 CR2 Batteries
CR2 batteries are best suited for use at room temperature.  At low temperatures, CR2 
batteries loose much of their charge.  The number of shots that can be taken with 
CR2 batteries may very depending on their make and condition.  Some makes of CR2 
battery can not be used.
• Using the monitor
• Keeping the shutter-release button 
pressed halfway
• Repeated autofocus operations
• Taking NEF (RAW) photographs
• Slow shutter speeds
To ensure maximum battery performance:
• Keep the battery contacts clean.  Soiled contacts can reduce battery performance.
• Use EN-EL3 batteries immediately after charging.  Batteries will lose their charge if 
left un used.
• CR2 batteries should not be reused after the “battery exhausted” indicator has been 
displayed.  Although the batteries may recover some of their charge when removed 
from the camera, they will be prone to sudden drops in voltage that may result in 
unexpected errors.