Oregon Scientific ATC3K User Manual

1.  Attach the rubber patch to the bottom of the helmet grip.
2+3. Place the helmet grip on the helmet, and thread the velcro strap 

through the helmet grip.

4. Secure the velcro strap by fastening 

it through the helmet vents.

5. Slide the camera into the helmet 

mount grip, and adjust the angle of
the camera making sure it is secure.

1. Place the handlebar grip on the handlebar.
2. Add the screw and nut to hold the handlebar

grip securely.

3. Slide the camera into the handlebar grip and

make sure the handlebar grip is locked  

with the camera.

4. Adjust the angle of the camera.

1. Attach the tripod mount to the bottom of the

camera.

2. With the tripod mount on the camera, screw

it onto the webcam stand.

3. Adjust the angle of the camera.

The camera can be mounted in a number of ways using the straps and the velcro patch
provided. Please follow the methods of mounting as suggested below:

a) With the base of the camera facing you, turn the clip clockwise 

to tighten its position.

b) With the base of the camera facing you, turn the clip 

counter clockwise to loosen its position.

1. Attach the rubberized patch to the bottom of the helmet mount grip.
2.+3. Thread the silicon rubber strap through the helmet grip.
4. Mount the helmet grip to the helmet using the silicon rubber strap.
5. Slide the camera into the helmet mount grip.
6. Adjust the angle of the camera making sure it's secure.
7. To avoid damage to the camera, the mount lock at the base must be 

loosened before twisting the camera.

Note: Use caution
when twisting; the
clip may be sharp.

#1

#2

#3

#4

#5

#6

#1

#2

#3

#4

#5

#1

#2

#3

#4